Diamond Grinding Wheel

1. The appearance of good uniformity and no cracks are the basic appearance of the high-quality grinding wheel;
2. Excellent packaging and printing anti-counterfeiting barcodes are the difference between genuine factory products and counterfeit goods;
3. The general rule of cutting and grinding is that the amount of iron is less, the wear is low, the grinding wheel is too hard, the amount of iron removed is small, the wear is too great, and the quality of the material is too bad. The inner quality of high quality is as little as possible abrasion, and the largest amount of iron removal, At the same time, feel good;
4, for carbon steel, alloy steel, cast steel, stainless steel, copper and aluminum, glass stone, due to their different tissue density and heat conditions, it also determines the choice of grinding wheel to be different; on the glass stone, the market There is a special glass stone cutting and polishing tool; copper aluminum material and stainless steel solid material application of a lower thickness or zirconia corundum as the substrate of the cutting or polishing sheet; cutting carbon steel, stainless steel profiles (non-solid) require the use of hardness Higher grinding wheels will greatly increase the life span; but for solid round steel and forgings, the grinding wheel must not be too high in hardness, otherwise it will not move!
5. If you have a large amount of abrasive wheel for your particular size, there may not be the most suitable abrasive wheel for you in the market. Please contact us and put forward specific conditions for use. We can provide you with the best use of the wheel. The cost of the grinding wheel, product quality assurance, rapid delivery, price concessions.